CZ 75 P-01 - 2 Years of Service

I've had the CZ P-01 for over 2 years now. It's been my primary carry gun for the most part during that time. I'm still going through holsters and made a few changes to the pistol and the way I carry it but it's continued to be fantastic. Some days I swap out for another pistol such as the P-10c or M&P9 Shield but I almost always end up going back to the P-01.

The pistol's current form is wearing a set of tritium fiber optic TruGlo TFX Pro iron sights and an Inforce APL-c. This seriously limits my selection of holsters to custom made deals but given that I spend half my year on night shift, it makes sense to have a white light to illuminate the dark corners of the world.

I've also switched my carry method to inside the waistband for day-to-day. The latest holster I'm using is the Gearcraft Holsters IWB made here in Georgia. It isn't the worst option but after several months of use, I've found issue with the canted clip mounting in combination with the belt clip design tends to leave the holster loose and on a few occasions, the holster came with the pistol on draw. It's a well made holster but I wish they had the option to change the cant. Update: It turn's out one of the holes is elongated to allow for adjusting cant. This are great holsters but I still wish they had a tuckable option for my setup.

I have no idea how many rounds I have through the gun. It's not a huge number but should be around 1,500 to 2,000 or more. I've shot just about everything FMJ wise that's immediately available and have had very few issues.

The only real complaints I have are my lack of skill with the double action trigger pull and the rubber coated base plate of the magazine has a sharp corner that pokes my fatty sides becoming painful after a while when carrying the spare magazine on the same side.

I need to spend more time with the pistol but CZ has solidified the P-01's position in my carry rotation as a primary, go-to option.

Gear Craft Industries IWB for the CZ P01 with Inforce APLc. #ccw #carrygun #thepewpewlife #cz #p01 #9mm #freedom #pewpewlife #gearcraft #gearcraftholsters #nsn #2a

A post shared by Ian Kocher (@der.yetti) on Jan 19, 2018 at 5:20am PST

My #EDC a #CZ #P01 #inforce #aplc #9mm #freedom #pewpew #2a #carrygun #gearcraftholsters #ford #mustang #thepewpewlife #gunsofinstagram #pewpewlife

A post shared by Ian Kocher (@der.yetti) on Jan 20, 2018 at 7:24am PST

Merry Christmas my fellow Humans or whatever.

Merry Christmas and Happy Holidays, or if you don't care, have a nice weekend. This has been a crazy year for me but a good year, all in all. Don't forget to reflect on the positives that happened this year, folks.

Please be safe out there and enjoy your time if you can.

May your gun be with you always and your phone hold a good charge.

CZ 75 P-01 - Cheaty McCheat-Face

I really like the CZ 75 P-01. It's probably one of my best guns. It's easy to carry and accurate. The trigger isn't too bad and is very smooth. It's possible to find holsters for it but it can be tricky. So what's the problem?

Well, the issue is me; basically my trigger control sucks. I'm having too much trouble mastering the double action trigger pull from a draw. I can be fast but my shots are poorly placed or I can go slow and be accurate. That would be the problem though, the accuracy is coming at a speed far too slow than what I'm comfortable with. Maybe if I got some professional training to help master the DA/SA but I haven't but the desire to seek out that training just yet.

In the mean time, I've decided to be a Cheaty McCheat-Face. I'm switching back to striker-fired guns.

The M&P 9 Shield, M&P9c, SIG P320 SC, Glock 26 and Walther PPQ M1 are now back in my rotation. With that, I will be able to go back to appendix carry (Shield) giving me more options on method of carry as opposed to the OWB method for the P-01.

Over the last few months, I'd been tracking my times and shot placement with the P-01, which led my to wonder if I would be any faster/more accurate with the striker guns. As it turns out, I'm not any faster but I am significantly more accurate. This doesn't really surprise me since my initial training was done on a striker gun (XD-40 Service). That and I think the triggers on striker-fired guns are inherently easier to shoot well, hence the cheating part.

I really wanted to master the DA/SA trigger but I just don't have the money to throw at getting past shooting the DA quickly. I'm managing around 50 rounds every weekend right now but I don't feel like that's enough to get past my control issues. If I can motivate myself to locate a class or professional instruction on mastering the DA/SA then I will look into switching back. Until such time, I will have to stick with striker-fired guns.

Life with the CZ-75 P-01 - A Great Carry Gun

I will preface this by saying that I have become a big fan of the CZ 75 P-01. I'm not sure that I can say I'm a full blown CZ fan boy yet but I do really like this firearm and other CZ weapons. It's not the best carry gun but it's been good so far. I'm having a hard time finding holsters in general and have ordered a custom Kydex OWB holster for it but it's going to be a while before I get it in. Once I have a proper holster I think this will become one of my favorite carry guns and will carry it much more than I have been.

Getting holsters for the P-01 is somewhat of a pain. There are just not many people out there making them for the P-01. I prefer the paddle style OWB holster in general. I especially like the Safariland 5198 model (I have 3 of them) but they do not make one for the P-01. They do for the SP-01 but not the P-01. I was able to pick up two Alien Gear holsters for this weapon, 1x Cloak Tuck 3.0 and 1x Cloak Slide OWB. The OWB has become the main holster for use as carrying the P-01 IWB is a pain. I did try the Galco M5X Matrix; never again. It's essentially trash. It has effectively zero retention. I'd rather have a leather holster than a plastic one with no retention. That said, I have ordered a custom made holster from Contact! Concealment but they have a 4 to 6 week delivery time and I'm around 4 weeks into waiting. I hate waiting for things I paid for. Blame my millennial-ness if you want.

The biggest down side to the P-01 is it's width; 1.38 inches according to the CZ USA website. It's .18 inch wider than the M&P 9c (w/o thumb safety) and .20 inch wider than the Glock 26. It does, however, have more rounds in the standard magazines but it is also a physically larger gun. The P-01 is more of a compact sized handgun where the other two are sub-compacts (even though the M&P9c is labeled as a compact I'd still categorize it as a sub-compact). The P-01 compares more with the Glock 19.That said, I prefer the P-01 for it's ergonomics over the Glock 26 any day, all day. Both are reliable and eat just about whatever you put through it.

An upside to the P-01 is magazine availability. While it doesn't take Glock mags, the P-01 can use standard 14 round CZ compact mags for a flush fit but the P-01 has a specific version that has a rubber base pad which acts as a finger extension. These are a little harder to find.

The trigger pull feels a little heavy but it is a double action/single action firearm with a decocker. To make the double action pull a little less tough the P-01 has a half-cock position that the decocker drops the hammer down to.

Ergonomics! Seriously, this piece feels great. It comes with these rubber grips that don't look that good but make the sidearm very controllable. Access to all the controls is easy. It also aids in accuracy. The P-01 is both accurate and precise and it's a blast to shoot. The trigger feels clean and breaks well when in single action mode. In double action mode is has some oddity that feels like you have to overcome a hump before you even reach the staging point.

One thing I really like about the P-01 I got is that I have the older NSN version. The initial version of the P-01 is what I call the NSN version which is the pistol CZ put through NATO trials. At some point, CZ changed the slide release spring which prevents the pistol from having the NSN on the frame designation. However, mine has the NSN on the frame and that makes me happy.

All in all, I really like the P-01 and would like to have the SP-01 to go with it. CZ-USA has a version of the P-01 they call the Urban Grey edition. It features a custom grey finish, with a threaded barrel for a suppressor, raised night sights and even has their Omega Convertible safety system. I'd rather have the NSN version any day.

Note: This review is short and oddly written. Right now I just want to post something because I'm pissed off about the latest executive order regarding gunsmiths and the DDTC. Thanks Obama.

CZ-75 P-01 - The Perfect Pistol? Probably not but I still really like it!

FINALLY! I've picked up one of, what I think is, the most interesting and beautiful versions of the CZ-75 based handguns made by CZ; the P-01. And it is good.

Seriously. I thought the Walther PPQ in 9mm was a contender for the all-around perfect pistol (and it still is) but the P-01 in 9mm might just be the King (other than the 1911) in my safe.

The CZ-75 P-01 is a modernized compact version of the classic CZ-75 developed by Česká Zbrojovka Uherský Brod (I hope that's correct). My initial shooting of the lovely P-01 indicates that the pistol is accurate even with it's 3.8 inch barrel. The standard 14 round magazine is a little small but there are a plethora of magazines available for the CZ-75 that should work. Actually it's a little overwhelming trying to figure out what will work but it seems reasonably simple. Like you have with the standard Glock 9mm's, you have a sub-compact, compact and "full-size" where you can use a magazine as long as the grip's length will comply except that there are special versions of the CZ-75 such as the SP-01, the P-07, the P-09 and the Czechmate that introduce a variety of capacities. With capacities of 14, 16, 17, 18, 19, 20 and 26 round counts from the factory you should be able to find one that meets your needs. The reason for all the options? Well, mostly because CZ has developed various pistols for a variety of uses based around the CZ-75. The CZ-75 has long been a favorite for our brothers on the other side of the pond for competitive shooting. They are also popular over here for the same reason, amongst others.

The gun comes with x2 14 round magazines similar to the magazines from compact versions of the CZ-75 but what separates these magazines is that they have a form-fitted rubber pad on the bottom to increase grip length. Technically, I can get my whole hand on the gun but the rubber pad gives a little more room. This type of magazine is specific to the P-01. Otherwise, the standard 14 round compact magazine should fit which is good as they are usually pretty cheap. I picked up a third magazine with the rubber pad per my norm.

The P-01 appears to be a PCR with a full length dust cover and integrated accessory rail but that is just speculation. There is an Omega Convertible version of the P-01 that includes the Omega trigger system, different sights and ambidextrous safety/decocker. The Convertible part is a system that allows the user to change out the internals from a manual safety to a decocker system based on the users preference. Speaking of user preference, the gun comes with rubber grips but I'm not sure how long those will stay. One of the reasons I went with the P-01 is that I really liked the wood grips that some people have been using. They really bring out the beauty of the firearm. The rubber grips provide a good grip but they just don't have the look. This is a bit of a dilemma as I feel the short barrel and overall length don't help with the recoil making the rubber grips pretty useful. I will be looking into picking up an SP-01 or P-09 for target and competitive shooting.

I'd like to go back to talking about the trigger. The pistol has a double-action/single-action trigger with a decocker. I noticed that when you decock the gun, the hammer drops to a halfway point. At this point the double-action pull is smooth and clean but if the hammer is resting at the lowest point, the pull gets heavy. At the beginning of the pull, there feels like point that you have to overcome that is heavier than the rest of the pull. I may not be describing well enough what I am feeling but I have other double-action pistols that don't seem to demonstrate this. I will try other CZ-75 pistols to see if this is normal.

It should be noted that there are two specifications of the P-01 excluding the Omega version. Originally, the P-01 was submitted for NATO trials which earned it a National Stock Number or NATO Stock Number (NSN 1005-16-000-8619) but a change in the slide stop spring meant that the NSN could no longer apply as the specification changed. Many of the guns that came to the US have the NSN (mine does which makes me very happy) but new guns should not have an NSN since they will have the new spring. You can only have the NSN on the gun if the gun comes in the configuration originally tested.

I have not been able to carry the gun yet but I have ordered holsters for it. I normally go for a Safariland 5198 paddle holster but they don't seem to make one for the P-01. They do have a variety but not the one I want. For the time being I will be trying a Alien Gear OWB and IWB 3.0 once they ship in. Fobus appears to have a paddle holster as well.

I'm very happy that my first CZ firearm and CZ-75 based handgun was a P-01. I can't wait to carry it.